All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
63
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.5.8. EHR Function
The spreader is fitted with EHR signal communication (socket) at the factory. The hydraulic signal is taken from
the sensor attached to the middle roller (see 2.4.2)
Depending on the carrier vehicle, the signal is output on lifting or on lowering. Check the EHR signal is set correctly
and correct it if necessary.
The spreader is stopped automatically when the front or rear hydraulics of the carrier vehicle are lifted. The spread-
er can be stopped manually at any time using the control panel.
If the sensor is
active
when the linkage is raised, set the EHR polarity to "High".
If the sensor is
inactive
when the linkage is raised, set the EHR polarity to "Low".
1. Select "EHR signal" menu point.
The EHR polarity selection menu will be displayed.
2. Turn the turn-and-push button to choose between
"High" and "Low".
3. Confirm your selection by pressing the turn-and-
push button.
The entry will be confirmed.
The main menu will be displayed.
