All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
20
2.0. Assembly
2.4.2. Attaching the precise overseeding unit
Screw the hose fittings
(A)
onto the hoses
(B)
and push
them into the socket
(C)
until
they engage.
Route the hoses
(D)
and adjust
to the right length.
Connect the hoses, clamps
(E)
and baffle plates
(F)
to the
hose bracket
(G),
following the
required spacing.
Note:
The two hoses in the middle should cross over
one another to ensure that the seed is well
distributed.
Fit the hose bracket
(G)
on the
frame of the brush unit
(H)
.
Position evenly at the required
height using the mounting holes
on the left- and right-hand
sides.
Install the steps (J) using the
bolts provided on the
perforated.
