All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
43
6.0. Before initial operation
6.4.2. Filling the precise overseeding unit
Before starting, ensure that the hopper on the
Vento
®
II
is completely secure.
Filling
1.
Make sure that the spreader
and blower are switched off.
2.
To fill the spreader release the rubber
straps (2) on the hopper and remove
the cover (3).
3.
Make sure that suitable rotary valves
are fitted ac- cording to the spreading
material table, and that the load relief
roof of the agitator has been mounted
cor- rectly.
4.
Fill the spreading material, making
sure that no for- eign bodies or
impurities get into the hopper.
5.
Before closing the hopper, make
sure that the seal is in place all
round between the hopper and the
hopper cover.
6.
Seal the hopper using the four
rubber straps (2).
CAUTION:
Use the steps (A) to fill the container
Irregular feed regulation
caused by incorrect filling.
The container lid must be closed
during use to avoid irregular feed
regulation.
