All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
57
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.5.4. Calibration test
1. Pull off all hoses on the spreader.
2. Place a container under the outlets.
3. Select "Calibration test" menu point.
"Product selection" is displayed.
4. Turn the turn-and-push button to choose between
"New product" and "Products already created".
New product:
5. Select "New product".
The entry box for the product name appears.
6. Turn the turn-and-push button to select the symbols
required for the product name.
7. Push the turn-and-push button to confirm the select-
ed symbol.
Advice
•
A maximum of 75 products can be saved.
•
Saved products can be overwritten but not deleted.
