Wfly ET08 страница 54 Скачать руководство пользователя | Manualshive

Страница: 54 / 84

background image

PROGRAM MIXES

The direction of the mixing ratio can be set separately.

It can create 5 mixing combinations, which can be customized by selecting channels or switch knobs, In

addition to being used to create a variety of aircraft ﬂight characteristics, it can be used for a variety of other
purposes.

Interface path: HOME/MON. → [GENERAL MENU] → [PROGRAM MIXES]

Ratio mode: Ratio mixing for simple mixing with directional settings.
Curve mode: Curve mixing, precise control of mixing between diﬀerent strokes, where “polyline” can be

precisely adjusted using 7 points.

Ratio Mixes

Curve
Mixes

Control
Switch

2 To use this programming mixes, you need to

enable this feature, so the status needs to be
switched to enabled. (When inhibit, the control
switch cannot be activated when it hits the active
position.)

The setting of the ratio programming mixes

4 Assign the primary and secondary channels,

and conﬁrm the channel polarity by actual operation

1 Switch the mode to the ratio and click on the

name of the mixed control 1 (the mixed control name
is the name generated by the combination of the
primary and secondary channels, such as the view
from the throttle to the aileron), and enter the mixing
conﬁguration interface.

3 Set the control switch, the default is [--], we can

set it as switch, knob rocker and so on.

(refer to the above mixing 1/2):

The conﬁrm key switch
point position

● Set the mixing ratio. There are two ratios of

positive and negative, which can control the mixing
ratio in both directions

(refer to the above mixing 2/2) curve mode:

● Set the oﬀset ratio, which is used to set the up

and down oﬀset of the midpoint of the overall mixing
position relationship.

(refer to the above mixing 2/2) rate mode:

● Set EXP and adjust the bending rate and

direction on both sides of the line.

● Set the point. The dotted line in the curve box on

the right is the position of the current point. Change
the rate to adjust the upper and lower oﬀset.

● Set the mixing control rate and adjust the

positions of both sides of the curve.

54

GENERAL MENU

«
...
52
53
54
55
56
...
»

Содержание ET08





















































































Отзывы:

Нет отзывов

Похожие инструкции для ET08

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Tivoli Audio Страницы: 6

Lazerpoint CM-TX-9

Бренд: CAMDEN Страницы: 3

Бренд: Analog Devices Страницы: 82

THERMOPOINT TM/J-500

Бренд: NIVELCO Страницы: 28

Бренд: Sennheiser Страницы: 9

Бренд: CRC Страницы: 7

Бренд: M-system Страницы: 3

Бренд: Jung Страницы: 15

Бренд: Cobra Страницы: 5

Бренд: Digi Страницы: 5

Бренд: Midland Страницы: 14

Бренд: Microtronics Страницы: 46

Бренд: Icom Страницы: 24

Бренд: Sony Страницы: 2

OPTISOUND 3030 C

Бренд: Krone Страницы: 52

Бренд: Icom Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды