manualshive.com logo in svg

Wfly ET08, Инструкция по эксплуатации

Поделиться
Скачать
Wfly ET08 Скачать руководство пользователя страница 44

RANGE CHECK

Turn on the telemetry when linking. After linked, 

the transmitter receiver can be connected normally 
to use this function! Only enter this interface, after 
toggling the SH switch, the power will be reduced! 

The range check is mainly used to test the 

distance

The control distance is related to the actual use 

environment!

Interface path: HOME/MON. → [LINKGE 

SETTING] → [RANGE CHECK]

3. The transmitter and receiver are powered, start 

moving position, and move the stick.

2. The transmitter and receiver maintain a certain 

height (about 1.5 meters above the ground) and the 

antennas are in the same direction (perpendicular to 
the ground).

1. Enter the interface and toggle the SH switch.

4. The transmitter checks the signal strength on 

the interface, and the receiver checks whether the 
status light and the servo dual rate are smooth. The 
above bring the comprehensive evaluation of the 
working distance!

Instructions:

1

Transmitter antenna

90° Upside vertical to ground

2

Approximately 

distance from the ground

1.5m high for testing!

3

Receiver antenna

90° to each other

Open area

* [

RAGE TEST] The results are for reference only and are not intended as the only performance 

standard, depending on the specific usage environment!

90°

Signal strength judgment:

The transmitter signal strength returned by the 

receiver can be viewed in the upper right corner of 
the screen status bar (the standby interface during 
normal operation) and the signal strength 
percentage indication ([Range Test] function 
interface). The more indicator bars, the larger the 

percentage value. The better the signal, conversely, 
the worse signal. The status bar has no signal bar 
indication, and there is no signal when the signal 
strength is 0%.

44

LINKAGE SETTING

Содержание ET08





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды