Wfly ET08 Скачать руководство пользователя страница 42

Страница: 42 / 84

BUS SERVO SETTING

1 Before using this function, you need to enable the [Telemetry] function and the receiver is connected

normally.

* This function needs the support of receiver which is withW.BUS!(such as RF207S/RF209S are with

W.BUS port.)

Interface path: HOME/MON. → [LINKAGE SETTING] → [BUS SERVO SETTING]

The BUS servo can memorize its own channel and diﬀerent settings. The servo can be conﬁgured on the

ET08 by connecting the servo via the W.BUS2 receiver interface. (WFLY W.BUS system is compatible with
S.BUS servos !)

Notice:

3 When using the BUS servo, ensure that the power supply is suﬃcient, otherwise the servo will have an

abnormal situation such as unstable output!

2 When setting, only one BUS servo can be connected for setting at a time.

Channel: Here is the channel assignment for the BUS

servo (deﬁning the servo working channel)

ID: Each BUS servo has an “identity” number (we can

distinguish the working position of each servo)

W.BUS2

Port

1 Transmitter Reads Servo ID

W.BUS2

Port

PPM

W.BUS

Port

2 transmitter to the servo distribution channel

3 The transmitter operates the corresponding

channel to verify that the servo is assigned correctly.

Connect the BUS servo to the "W.BUS2 slot" of the receiver and the transmitter clicks the "Read" button.

First, read the BUS servo ID.

In the "Channel" setting item, select the corresponding channel according to the function of the servo.

Click the "Write" button, set the servo channel and complete the parameter saving, and exit the setting
interface.

Prerequisite:

The transmitter and receiver are linked (turn on telemetry) and communicate normally.

Third, verify the steering gear channel.
Turn on the monitor, connect the servo to the “PPM/W.BUS” interface, and operate the joystick or switch

knob (currently connected to the channel set by the servo).

Second, the channel allocation.

Setting method:

The use of W.BUS function is mainly to allocate channel parameters for BUS servo,

which is divided into three main steps.

Write: make channel assignment

Read: Read the BUS servo ID

LINKAGE SETTING

Содержание ET08





















































































Результаты поиска

Содержание ET08

Отзывы:

Бренды по названию

Популярные бренды

Wfly ET08, Инструкция по эксплуатации

Результаты поиска

Содержание ET08

Отзывы:

Бренды по названию

Популярные бренды