Welch Allyn Connex IWS, Инструкция по применению

Страница: 202 / 266

Select
Display MAP
to display mean arterial
pressure (MAP) in the NIBP frame on the Home tab.
If
Display MAP
is selected, specify which numerics
are primary in the NIBP frame. On the Home tab,
clinicians can touch the NIBP frame to toggle between
views.
Unit of measure Select the NIBP unit of measure for display.
Tube type Select the number of tubes that are connected to the
NIBP cuff used with this monitor. If you select
1 tube
,
the only algorithm available for selection is
Step
.
Algorithm default Select the default algorithm used to determine NIBP
measurements.
Cuff inflation target If you select the
Step
algorithm, touch and enter
a default cuff inflation target for each type of patient.
Clinicians can change the CITs from the default CITs that
you set here on the
Settings
>
Setup
>
NIBP
tab.
Allow interval program changes Select to enable user to modify interval program
selections in the
Settings
>
Setup
>
Intervals
tab.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit .
Set up an NIBP averaging program
In Advanced Settings, set up NIBP averaging programs to make them available for use.
To set up a program:
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code .
d. Touch OK .
The General tab appears.
2. Touch the Parameters tab.
3. Touch the Programs tab.
4. Touch the button of the program you want to set up.
The keyboard icon appears in the button.
196 Advanced settings Welch Allyn Connex
®
Devices