Fig. 152: Identifying Piece Of Tape On Wind Extender's Rear Section
Courtesy of VOLVO CARS CORPORATION
Attach a piece of tape to the wing extender's rear section to protect it when removing the bumper cover at
the front edge. The tape must be positioned so as not to leave any marks when prying the bumper loose.
Carry out the procedure on both sides of the car.
Fig. 153: Removing Bumper Cover
Courtesy of VOLVO CARS CORPORATION
Remove the bumper cover from the body by carefully prying off the ends at the taped surface using a
weatherstrip tool. Pull off the cover under the tail lamp and from the rear edge of the wing on each side. It
is secured by four clips at the tail lamp and four in the rear edge of the rear wing. Pull the bumper cover
straight back.
Disconnect the connector for the license plate lighting, on the left-hand side. If the car has rear parking
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories