Fig. 73: View Of Left-Hand Hole Drill Mark
Courtesy of VOLVO CARS CORPORATION
Make a clear punch mark in the center of the marking for both front holes.
Cover part of the underneath of engine compartment to prevent shavings from being blown up.
Pre-drill with a
4 mm (5/32")
drill bit, then a
8 mm (5/16")
drill bit and finally with drill bit
part no.
9814112
. Use a drill stop to prevent drilling through parts above.
Remove any shavings.
Remove the cover from under the engine.
NOTE:
Use a smooth drill bit head and ensure that the drill bit does not slip off the
surface to be drilled, the surface is small in relation to the completed size of the
hole.
NOTE:
Rustproof the hole edges thoroughly and as well any scriber markings.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories