the receiver together with 3 M8 screws. Tighten.
the pipe couplings, 2 x M8. Make sure the O-rings are securely located. Tighten the screws.
the M8 nut below the fender liner. Tighten.
the fender liner together with the plastic nut and the retaining clip.
FINISHING
CHECKING THE FUNCTION AND LEAK TRACING
Vacuum pump the air conditioning (A/C) system. See:
VACUUM PUMPING
.
Fill the air conditioning (A/C) system with refrigerant. See:
REFRIGERANT, FILLING
.
Leak trace the air conditioning (A/C) system. See:
LEAK DETECTION, TRACER AGENT
,
LEAK
TRACING, ELECTRONIC LEAK TRACER (2007, 2010-11)
or
LEAK TRACING, ELECTRONIC
LEAK TRACER (2008-09)
.
INSTALLING COMPONENTS AND CHECKING PERFORMANCE
Install:
the bumper cover. See:
COVER BUMPER FRONT (2007 - 2011 EARLY)
or
COVER BUMPER
FRONT (2011 LATE - 2012)
right-hand front headlamp. See:
HEADLAMP BULB (2007)
or
HEADLAMP BULB (2008-2012)
.
Carry out a performance test on the climate control unit. See:
CLIMATE CONTROL SYSTEM, CHECK
.
ELECTRIC BOOSTER HEATER (2007)
PREPARATORY WORK
REMOVING COMPONENTS
Remove center console. See:
REMOVING CENTER CONSOLE
.
REMOVAL
REMOVING THE ELECTRICAL PREHEATER
NOTE:
The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation