Fig. 142: Drilling Holes
Courtesy of VOLVO CARS CORPORATION
Drill holes in the centers of the markings using a
3 mm (7/64)
diameter drill bit.
Drill out the holes. Use a
10 mm (25/64")
diameter drill bit.
Fig. 143: Enlarging Holes In Bumper Casing
Courtesy of VOLVO CARS CORPORATION
Enlarge the holes in the bumper casing using a hole cutter.
Use special tool: 9997234
. Place the hole
tool's support sleeve on the inside, and the cutting part on the outside of the bumper cover.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories