Fig. 46: View Of Covered Engine Bay
Courtesy of VOLVO CARS CORPORATION
Cover the underneath of the engine with cardboard or similar, so that drilling shavings does not blow up
into the engine compartment.
Carefully drill out the four holes where the clips were located. Use tool
P/N 9814112
.
File down the edges of the holes.
Remove any shavings.
Remove the cover from under the engine.
NOTE:
Do not drill out the front hole to the left. A new hole will be drilled to the
side of it later.
NOTE:
Rustproof the hole edges thoroughly.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories