ROOF, WINDSHIELD AND REAR WINDSHIELD FRAME
CANT RAIL/ROOF SIDE
INFORMATION
PRINCIPLES OF JOINING
Fig. 27: Identifying Cutting Points For C And D-Posts
Courtesy of VOLVO CARS CORPORATION
Roof pillars must be joined as shown in the illustration unless otherwise indicated in the method.
Cut the different panel sections with a 50 mm offset. This applies when replacing all roof pillars.
C = minimum 50 mm
HINT: When replacing a pillar, it is often difficult to identify where the deformation ends. It may be best
to replace a larger section of the pillar.
NOTE:
The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation