Fig. 98: Identifying Spacer And Right-Hand Half Of Lead-In
Courtesy of VOLVO CARS CORPORATION
Install:
the spacer that holds the heat exchanger and evaporator pipes apart
the right-hand half of the lead-in using the 2 screws.
INSTALLING COMPONENTS
Install:
the M8 screw securing the air conditioning (A/C) pipes in the engine compartment. See:
TIGHTENING
TORQUE
the heat exchanger. See
HEAT EXCHANGER
.
the central electrical unit bracket using the 2 nuts. Install the cable harness
the central electrical unit on the bracket. See:
CONTROL MODULE RELAY BOX PASSENGER
COMPARTMENT
the center console. See:
INSTALLING CENTER CONSOLE
NOTE:
Pull the insulation for the pipes as far in towards the evaporator as possible
before installing the spacer and the right-hand half of the lead-in.
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation