Fig. 138: Identifying Gasket, Combustion Chamber And Molded Gasket
Courtesy of VOLVO CARS CORPORATION
Replace both gaskets supplied with the fan motor.
Install:
the gasket (1) between the heat exchanger housing and the combustion chamber
the combustion chamber (2)
the molded gasket (3). Ensure that the hole for the glow plug is above the hole in the combustion chamber
the fan motor. Ensure that the molded gasket is positioned correctly in the recess.
Tighten the 3 screws on the fan motor.
Install:
the cable terminals and wiring for the fan motor in positions 13 and 14 (black and brown) in the 14-pin
connector
the fan motor housing
NOTE:
The molded gasket (3) has a small tab that must fit in the corresponding mating
faces on the heat exchanger housing and the fan.
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation