Remove the glove compartment. See:
GLOVE COMPARTMENT
.
REMOVAL
REMOVING THE AIR QUALITY SENSOR (AQS)
Fig. 30: Air Quality Sensor
Courtesy of VOLVO CARS CORPORATION
The air quality sensor (AQS) is located in front of the damper motor module (DMM) recirculation.
Turn the air quality sensor (AQS) approximately 60 degrees counter-clockwise.
Disconnect the connector.
INSTALLATION
INSTALLING THE AIR QUALITY SENSOR (AQS)
Connect the connector.
Position the air quality sensor (AQS) in the groove. Turn the air quality sensor (AQS) approximately 60 degrees
clockwise until it stops.
Check that it is secure.
Install the glove compartment. See:
GLOVE COMPARTMENT
.
FINISHING
Order software.
C30 - 30782266
TESTING THE AIR QUALITY SENSOR (AQS)
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation