Fig. 66: Identifying Lower/Front Pipe/Hose Connector
Courtesy of VOLVO CARS CORPORATION
Position the compressor.
Fasten the compressor with screws, 3 pcs. M8
Install the longest screw in the rear mounting
Insert the screws
Begin by tightening the longest M8
Tighten the remaining 2 pcs. M8.
It is important to follow the installation instruction to make sure of the AC-compressor's position. In case of
wrong installation order, the AC-compressor ends up at an angle. This leads to incorrect loading on the belt
tensioner, as well as displacement of the belt and subsequent belt failure.
Connect the connector.
Install the pipe connections, 2 M8 (1) and (2). Ensure that the O-rings are securely located between the
compressor and the pipes.
Tighten the screws.
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation