Fig. 49: View Of Radiator Bracket Drill Hole
Courtesy of VOLVO CARS CORPORATION
Take a
8.5 mm (21/64")
drill bit and drill through the hole in the engine's protective plate and through the
bracket for the radiator.
Remove the engine splash guard.
Fig. 50: Identifying Tool P/N 9814112
Courtesy of VOLVO CARS CORPORATION
Cover the underneath of the engine opposite the last hole with cardboard or similar, so that drilling
shavings does not blow up into the engine compartment.
Carefully drill out the last hole. Use tool
P/N 9814112
.
File down the edge of the hole.
Remove any shavings.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories