the mounting block in the grooves on the pipe
the plastic clip holding the mounting block
the M8 screw securing the air conditioning (A/C) pipes to the evaporator.
Press in the hose into the mounting below the right-hand suspension turret.
PIPE/HOSE BETWEEN CONDENSER AND EXPANSION VALVE, REPLACING
REMOVING COMPONENTS
Fig. 113: Identifying Coolant Reservoir, Power Steering Fluid Reservoir And Hoses
Courtesy of VOLVO CARS CORPORATION
Remove:
the coolant reservoir (1) but leave the hoses in place. Place the reservoir on the valve cover
the power steering fluid reservoir and hoses (2) from its mounting by pulling it upwards at an angle.
Remove:
the ground strip (3) from the connection at the right-hand suspension turret
the 2 switches (4) for the air conditioning (A/C) system pressure sensor from the air conditioning (A/C)
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation