Fig. 20: Locating Bellhousing Bolts
Courtesy of VOLVO CARS CORPORATION
Remove:
the starter motor. See
STARTER MOTOR (TURBO)
or
STARTER MOTOR (NON-TURBO)
the 4 screws between the engine and transmission.
LOWERING THE ENGINE AND TRANSMISSION
Lower the engine
10 mm
by turning see
9997103
.
HINT: 10 mm corresponds to 6 revolutions on the screw.
REMOVING THE TORQUE ROD
NOTE:
One screw is located against the heat shield for the three-way catalytic
converter (TWC).
2012 Volvo C30 T-5
TRANSMISSION Clutch - Removal, replacement and installation