Install:
the bumper rail using the 6 M6 screws. Wait before installing the 2 screws for the servo unit
the radiator using the 4 M8 screws
the servo unit using the 4 M8 screws
the cable harness and washer hose on the bumper rail
the horn using the 2 M6 screws
the washer reservoir using the 1 M6 screw
the front section, see
FRONT END
.
Rustproof. See:
RUSTPROOFING
.
FRONT WHEEL BEARING
REMOVAL
REMOVING THE FRONT WHEEL ARCH
Remove components. See:
FRONT SECTION, EXPOSING
.
Grind off the welds.
Cut off the damaged section.
Grind clean and apply welding primer.
INSTALLATION
INSTALLING THE FRONT WHEEL ARCH
NOTE:
The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation