8 mm for thicknesses less than 2.5 mm
10 mm or more for thicknesses above 2.5 mm.
Fig. 21: Identifying Welding Lens Diameter
Courtesy of VOLVO CARS CORPORATION
Test weld several test pieces. Break the panels apart and measure the size of the welding lens diameter (A), see
illustration.
Fig. 22: Identifying Proper Spot Welds On Both Panels
Courtesy of VOLVO CARS CORPORATION
Add filling primer if there is grinding damage.
NOTE:
Use welding primer on all internal flanges.
CAUTION: Make sure that the spot welds take properly on both panels.
2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Body Frame - General Information