the screws for the intake manifold in the cylinder head
the hose clamps at the turbocharger (TC)
the hose clamps at the mass air flow (MAF) sensor
the intake manifold between the air cleaner (ACL) and the turbocharger (TC)
the hose for the EVAP canister from the intake manifold.
FINISHING
INSTALLING COMPONENTS AND TESTING THE ENGINE COOLANT HEATER
Fig. 171: Identifying Shield And Clips
Courtesy of VOLVO CARS CORPORATION
Install:
the right-hand front wheel
the lower mounting on the nut for the exhaust system. Tighten. See:
TIGHTENING TORQUE
the shield under the vehicle using the 7 clips.
Carry out a performance test of the engine coolant heater. See:
FUEL-POWERED PREHEATER,
CHECKING
.
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation