Vicruns 2S-0.4G-B, Руководство пользователя

Страница: 64 / 300

-63-
Chapter 4 Operation and Display
In many applications, the inverter needs to run at a low speed for a short time,
which is convenient for testing the condition of the equipment, or other debugging
actions. In this case, it is more convenient to use the jog operation.
4.6.4 Jog operation
Output frequency
Time t
Acceleration and deceleration
reference frequency P0-11
Jog running
frequency P7-00
Actual acceleration time
Set acceleration time
Jog command
Jog acceleration time P7-01 Jog deceleration time P7-02
Actual deceleration time
Set the deceleration time
Figure 4-14 Schematic diagram of jog operation
4.6.4.1 Parameter setting and operation of jog operation through the operation
panel
JOG -04=0
Jog command
button (stop state)
Panel command mode Jog running parameters
Forward
jog operation
Reverse
jog operation
P7-00 Jog running frequency
P7-01 Jog running frequency
P7-02 Jog running frequency
P7- 28=0
P7- 28=2
P0
After setting the relevant function code parameters as shown in the figure above,
in the inverter stop state, press the JOG key, the inverter will start to run forward
at low speed, release the JOG key, the inverter will decelerate and stop.
Figure 4-15 Schematic diagram of jog parameter setting
C
h
a
p
te
r
4