Vicruns 2S-0.4G-B, Руководство пользователя

Страница: 151 / 300

Function
code
Name
Description
(setting range)
Factory
Default
Change
P3-16
Field weakening torque correction
factor
50% ～ 200% 100%
☆
This parameter is used to correct the motor torque value in the constant power area, and ge-
nerally does not need to be modified.
Chapter 6 Description of Function Codes
Function
code
Name
Description
(setting range)
Factory
Default
Change
P3-17 Slip compensation gain 50%
～
200% 100%
☆
This parameter is used to adjust the steady speed accuracy of the motor. When the speed is
too high, the parameter should be adjusted to a smaller value, and vice versa.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P3-18
Speed loop feedback filter time
constant
0.000 ～ 1.000s 0.015s
☆
This parameter is used to set the filter time constant of the speed feedback value. Increasing
the value can improve the speed stability, but will reduce the system response speed; decr
-
easing the value can improve the system response speed, but will reduce the speed stability.
Usually no modification is required
.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P3-19
Speed loop output filter time
constant
0.000
～
1.000s
0.000s
☆
This parameter is used to set the filter time constant of the torque given value, which is bene -
ficial to improve the speed stability. Generally, no setting is required.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P3-20 Electric torque upper limit source 0 ～ 4 0
☆
C
h
a
p
te
r
6
-150-