Vibra CJ-E series, Руководство по эксплуатации

Страница: 76 / 112

Input/Output to/from External Devices
-62-
6-1 Outputting to a Printer
By connecting a printer to the balance, span adjustment and span test results and measurement
results can be printed in ISO/GLP/GMP compliant form.
参 考
For printing examples, refer to “Appendix 3: Printing in Compliance with ISO/GLP/GMP”
(P. 91).
Connecting a printer
By using the D-SUB9P cable, connect the RS-232C connector of the balance to a printer.
The printers that can be connected to the balance are CSP-160 and CSP-240 (SHINKO DENSHI).
For the printer, the following setting is required. Set the following by referring to the operation
manual of the printer.
- Set the printing function (printing control) to “balance control.”
- Make the baud rate and other communication settings compatible with the settings made in the
balance.
注 意
The date and time data set in the printer is also printed. Before printing, set the date
and time in the printer.
Printing span adjustment and span test results
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “

”
is displayed, release the finger.
2

Press the [Function] key several times to select “ 

.”
Select “1” by pressing the [Zero/Tare] key.
3

Press the [Function] key several times to select “


.”
Select “1” by pressing the [Zero/Tare] key.
4
Save the setting.
Press the [Set] key.
The balance goes back to normal display.
Caution
Reference