Vibra CJ-E series, Руководство по эксплуатации

Страница: 43 / 112

3-5 Measuring Specific Gravity
-29-
Measurement
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “  ”
is displayed, release the finger.
2
Select “Gravimeter.”
 
Press the [Zero/Tare] key several times to select
“
 
.”
3
Save the weighing mode.
ｇ


Press the [Set] key.
The “gravimeter” mode is set, displaying “d.”
4
Set to the water temperature setting mode.


<Press and hold>
Press and hold the [Zero/Tare] key.
5
Set the in-container water temperature. Set the water temperature with the following steps:
Set the water temperature starting from a higher-order
digit.
1. Press the [Zero/Tare] key.
Zero blinks in the rightmost digit.
2. Select a number by pressing the [Zero/Tare]
key.
Pressing the key toggles the number between
0 and 9, and decimal point.
3. Pressing the [Function] key shifts the blinking
digit to the left, and the next lower-order digit
blinks.
Set the water temperature by repeating steps 2
and 3.
参 考
- If using a liquid medium other than water,
select the medium by referring to P. 31
.
- For a liquid medium other than water, set the
density.
- The value set is held even after the power is
Reference