Vibra CJ-E series, Руководство по эксплуатации

Страница: 96 / 112

Troubleshooting
-82-
Problem Cause Remedy
Intended output function settings
are not established.
Communication conditions
disagree with the external device.
Make the balance compatible in
communication conditions with
the external device by referring
to their operation manuals.
Check outputs with the following
methods:
Initialize the function settings by
referring to “Section 7-3:
Initializing (P. 83) or Function
Setting List.
Then, set to a communication
condition of 1,200 bps, 8-bit
data, 2-bit stop bit, and no parity
by referring to the operation
manual of the external device.
Now, output is done once after
stabilization, after the [P] key is
pressed. Check output by
pressing the [P] key.
Wrong cable connection To connect the balance to a
general-use PC, a cross cable is
required (Refer to “Section 6-2:
Connecting to External Devices
via RS-232C Interface” (P. 64)).
Arrange it yourself or contact our
Sales Office.
No outputs
The cable is disconnected or not
properly connected.
Check for proper cable
connection.
The current settings of the
balance are unknown.
You can initialize the balance
(“Section 7-3: Initializing” (P.
83)).