Vibra CJ-E series, Руководство по эксплуатации

Страница: 19 / 112

1-3 Workings of Operation Keys
-5-
1-3 Workings of Operation Keys
The operation keys are provided on the front of the main unit. Use these keys to operate and set
the balance.
参 考
How to press the keys
In some operation keys, executed functions depend on how they are pressed.
For example, the [Set] key saves settings when pressed shortly (short press). When pressed and
held, the key inputs settings (press and hold).
In this manual, how keys are pressed is expressed as follows:
- Press: Give a light press of the key and then release the finger.
- Press and hold: Hold the key down and release the finger after the appropriate display is
obtained.
- Continuously press and hold: Hold down the key for three seconds or longer.
Pressing a key can sound the buzzer or change buzzer sound tones (Refer to “Appendix 1:
Function Setting List” P. 86).
Reference
Direction key: Use to set the
function setting, etc.
[Zero/Tare] key: Use to zero a
readout or to select a function.
[Function] key: Use to switch
measurement modes and to call
a function.
[Set] key: Use to
start settings.
[Print] key: Use for
printing or other purposes.
[On/Off] key: Use to power on/off
the main unit.