Vibra CJ-E series, Руководство по эксплуатации

Страница: 48 / 112

Various Measuring Methods
-34-
3-6 Weighing an Animal
The balance can accurately weigh animals and other samples that move during measurement.
Even if animals and other such moving samples move during measurement, if weight variations fit
within a set value range, the measured value is held (fixed) and displayed.
参 考
A weight variation range for value holding can be set with “

.
”
By changing minimum readability, a stability detection range can be also changed with a
combined use of “

” (Refer to “Section 5-2: Minimum Readability Setting” (P. 53)).
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “

”
is displayed, release the finger.
2
Select “Animal Weighing.”
 
Press the [Zero/Tare] key several times to select
“
 
.”
3
Save the weighing mode.

g
Press the [Set] key.
The “animal weighing” mode is set, displaying “ .”
4
Set the response speed according to the
animal move. Set the response speed using the [Set] key.
The response speed is indicated with the position
to which the pointer
f located in the right side of
the display points.
速い（おとなしい）
中（中間）
遅い（暴れている）
5
Place the sample animal. When weight variations fit within the set range, the
value is held. Holding the readout is reported with
“
” shown in the display.
When automatic tare range setting is ON, a tare range
is automatically set after the animal is removed and
weight variations fit within a set range. When
automatic tare range setting is OFF, a held value is
displayed until the [Zero/Tare] key is pressed.
Fast (quiet)
Middle (in-between)
Slow (wild)
Reference