Vibra CJ-E series, Руководство по эксплуатации

Страница: 56 / 112

Various Measuring Methods
-42-
„ Judging by absolute values using the method of entering values
Set upper and lower limits by entering values using the keys.
Check that the limit function is set for judging by absolute values (Refer to the previous section
“Limit function setting”).
1
Set to the mode of entering values.

<Press and hold>
Press and hold the [Set] key. After “

” is
displayed, release the finger.
2
Enter the lower limit value. Enter the lower limit value with the following steps:
1. Press the [Zero/Tare] key.
Zero blinks in the right end.
2. Select a number by pressing the [Zero/Tare]
key.
Pressing the key toggles the number between
0 and 9, and decimal point.
3. Pressing the [Function] key shifts the blinking
digit to the left, and the next lower-order digit
blinks.
4. Press the [Set] key to save the value.
For the case of one point setting, this operation
completes the setting saving. Go to step 4.
For the case of two point setting, “

” is
displayed.
3
Enter the upper limit value. Enter the upper limit value by using the same
operation as with step 2.
The judgment value is saved and then the balance goes
back to normal display.
4
Weigh. Place a judgment target sample on the pan.
The OK, LO, or HI result judged from the upper and
lower limit values is displayed with the “

” indication.