Vibra CJ-E series, Руководство по эксплуатации

Страница: 52 / 112

Various Measuring Methods
-38-
3-8 Judging “Above” and “Below” (Limit Function)
By setting values in the balance, you can judge whether measured values fit within set ranges
.
参 考
The limit function can be used in the following weighing modes: weighing machine, parts
counting, percentage weighing, and unit converting
.
„ How to judge
Set lower and upper limits. The judgment result is indicated by “

” telling you that the measured
value is below (below lower limit), appropriate, or above (above upper limit).
1点（下限）設定の場合
表示無し
下限値≦計量値
計量値＜下限値
2点（上下限）設定の場合
上限値＜計量値
下限値≦計量値
計量値＜下限値 上限超
適量範囲
下限未満
参 考
For the case of one point setting, the point to be set is for only the lower limit that judges
“appropriate” and “below.”
Judgment results can be also displayed in graph form.
←上限超
←適量範囲（計量値に応じて表示）
←下限未満
Set the function setting “
･ 
” to “
•
” (2-point bar graph )(Refer to “Appendix 1: Function
Setting List” (P. 86)).
Bar graph display is possible only for “two point setting.”
„ Judgment criteria and limit value setting
A limit value can be judged with any of the following criteria:
- Absolute value: Values (limit values) including upper and lower values are set. Based on
these values, measurements are judged.
- Deviation value: A reference value is set. Measurements are judged by specifying an upper
limit or a lower limit range with respect to this reference weight.
Above the
upper limit
Appropriate
range
Below the
lower limit
When one point (lower
limit) is set
Lower limit
≤
Weight
Weight
<
Lower limit
When two points (lower
and
upper limits) are set
Upper limit < Weight
Lower limit
≤
Weight
Weight < Lower limit
N/A
Below the lower limit
Appropriate range (graph readout depends on the
judgment result)
Above the upper limit
Reference
Reference