Appendix H - USB Barcode Reader
_______________________________________________________________________________________________________________
MNL000545
Revision 0
10/04/2017
BSGS eV / BULKGUARD eV
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page APP
H
-
4
Versum Materials Confidential
Barcode Setup
The system can be configured with a barcode verification feature. When used properly, this feature
ensures that only designated product is installed during the cylinder change process. The feature
requires use of cylinders that have been systematically labeled with a code that identifies the product
contents. See example label below. If the controller was purchased with the external barcode scanner
option, the information may be entered automatically by scanning the barcode. Otherwise, the
information may be entered manually thru a pop-up keypad on the controller screen.
If the barcode verification feature is not used, skip this section.
Before connecting the USB Barcode Reader device, the Technician must be aware of the equipment to
ensure no gas safety alarm and flammable atmosphere are present.
Enabling the Barcode
How to enable barcode feature:
1)
From the Configuration Menu:
a.
Log‐in to controller.
b.
Select “Configuration Menu”.
c.
Select “System Setup”.
d.
Select “Set Product Code” from the System Setup menu.
e.
Enter the Product Code for the gas type to be used in this cabinet. The product code is the
portion of the code within the barcode string that identifies the product type. It is the piece of
information that will be compared to confirm that the correct cylinder has been installed.
Press “OK” when complete.
* A00187602125324*
