Chapter 1 - Safety Warnings
_______________________________________________________________________________________________________________
MNL000127
Revision 8
07/27/2016
Gas Equipment
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
1
-
8
The control circuits for the system use 115/220 VAC, 50/60 Hz. Do not attempt to work on the system
without first turning the power off and tagging out and locking out the electrical supply disconnect
switch per plant lock out procedures.
Follow the Typical Minimal Lockout or Tagout System
Procedures described by Occupational Safety and Health Admin., Labor Para. 1910.147.
1.6
Falling Equipment Hazard
This system is a top heavy device. If it is not
properly installed, it could fall and injure,
crush or kill personnel working in the area.
When moving and installing the system, extreme care needs to be taken to support it properly. Due to
the top heavy nature of the system, when moving or if not installed properly, it could tip over, injuring,
crushing or possibly killing personnel in the area. Moving and setting equipment shall be done only by
those persons having proper training and qualification in lifting and rigging.
1.7
Gas Cylinder Handling Hazard
Improper handling and storage of
compressed and liquefied gas cylinders could
cause injury or death.
Restrain gas cylinders during storage and use. Keep protective cap on cylinder when not dispensing
gas. Lifting gas cylinders could cause strain or injury. See Safetygrams found in the Safety section of
the Operation Manual.
