Veeco Dimension 3100, Руководство пользователя

Страница: 104 / 376

Stage System
Stage Menu Commands
84 Dimension 3100 Manual Rev. D
Figure 5.2p Stage Initialize/Cancel Prompt
3. To begin initialization, click Initialize . As the stage begins a series of motorized movements,
the screen indicates operating status (see Figure 5.2q ).
Figure 5.2q SPM Move to Lower Limits Prompt
Note: The initialization sequence may be aborted at any time by clicking Pause (see
Figure 5.2r ).
Figure 5.2r Stage Initializing Prompt
4. The microscope Z-axis moves to the top of its travel. When this is achieved, click Ok to
continue.
5. The microscope focuses its camera optics to the extent of its travel. When this is achieved,
click Ok to continue (see Figure 5.2s ).
Figure 5.2s Optics Move to End of Travel Prompt
6. Next, the camera zoom optics assembly zooms. When the camera zooms in to the limit of its
travel, click Ok to continue (see Figure 5.2t ).
Figure 5.2t Stage Zoom Prompt
Stage
Cancel Initialize
028
Stage
Initializing—Press Pause to abort
Stage
Optics should move to end of travel
Ok
Stage
Zoom in
Ok