Treaton MV200, Руководство пользователя

Страница: 87 / 222

4.12 Display settings menu
4-39
4.12.2 Menu of settings of measuring parameter blocks
Menu allows to configure the areas of additional and the main monitoring parameters displaying
(Figure 4.4, positions 1, 12).
Table 4.7. The list of monitoring parameters that can be selected in any of the displayed fields
of the screen
1. Empty No data
2. AutoPEEP Residual pressure level in lungs
3. C/R (LSF) Dinamic с ompliance/resistance
4. Cst/Rst Static compliance/Static resistance
5. EtCO
2
%/VCO
2
*
Concentration of СО
2
in the exhaled mixture / Elimination of CO
2
per
minute
6.
EtCO
2
mmHg/FiCO
2
Partial pressure of СО
2
in the exhaled / inspired mixture in mmHg
7. FiO
2
Fractional concentration of inspired oxygen
8. fspont Frequency of spontaneous breaths
9. FlowPeak Peak inspiratory flow
10. Leak Leakage flow from the breathing circuit
11. MV/MVspont Minute volume / Minute volume of spontaneous breaths
12. MValv/Vd* Minute alveolar ventilation / Functional dead space
13. Paux Auxiliary external pressure
14. Ptp Transpulmonary pressure
15. PIP/Pm/PEEP
Peak inspiratory pressure / Mean pressure for the respiratory cycle /
Positive end-expiratory pressure
16. Pplat Plateau pressure
17. RB/I:E Respiratory rate / Inspiratory:expiratory ratio
18. Valv/Vd:Vexp* Alveolar ventilation / Functional dead space: tidal volume
19. Vexp/Vinsp Expiratory volume / Inspiratory volume
20. С O/VCO
2
* Cardiac output (by Fick) / Elimination of CO
2
per minute
* - parameters of volumetric capnometry VCO
2
, Valv, MValv, Vd and cardiac output (CO) by Fick are
available only if device is equipped with mainstream capnometer, volume capnometry module and func-
tion of cardiac output.