Treaton MV200, Руководство пользователя

Страница: 9 / 222

1.1 Intended use
1-1
1
INTRODUCTION
1.1 Intended use
Intensive care ventilator MV200 (hereinafter – device, ventilator) is intended for carrying out
controlled and assisted artificial ventilation of lungs for all patient groups with tidal volume from
10 ml dependent on artificial ventilation in resuscitation units, surgery and intensive care de-
partments of professional medical facilities, and also at transportation within professional medi-
cal facilities.
Ventilation modes of device are in detail described in it. 4.1 and the Appendix 1.
Figure 1.1 - Appearance of the device
Simplicity of control, functional design of the device, graphical display module allowing to set it
under the optimum angle provide convenience of operation.
The device is equipped with the built-in respiratory mixture flow generator (analogue of the tur-
bine) and does not need sources of the compressed air. For connection to the high pressure
oxygen line the device is equipped with the pneumatic socket. The built-in oxygen sensor
measures oxygen concentration in the respiratory mixture and allows controlling operation of
the air-oxygen mixer of the device.
The device can have the version allowing operation with sources of low pressure oxygen. In this
case it has the special low pressure oxygen input.
At emergency case (absence of oxygen) the device provides ventilation only with air. Due to its
design the device can operate even at the minimum pressure in oxygen system of the hospital,
taking away all possible oxygen from the line. Therefore deviations in FiO
2
regulation are possi-
ble.