Treaton MV200, Руководство пользователя

Страница: 34 / 222

3.3 Preparing for operation
3-6
Figure 3.4 – Self-locking button for changing the segments position
3.3.3 Installation of humidifier
•
Install the humidifier into vertical slots of the holder and secure on the bracket (Figure 3.5).
Figure 3.5 – Installation of humidifier
•
Fill the humidifier chamber with distilled water and prepare humidifier for operation in accor-
dance with its operating manual supplied.
Note :
1. Use humidifiers recommended by the manufacturer.
2. When using the humidifier follow the its operation manual.
3. When using the humidifier the active humidification method is applied.
For the operation of the humidifier use only distilled water.
3.3.4 Assembling of the breathing circuit
•
Prepare elements of the breathing circuit, filters, breathing bag (test lung), and water trap of
oximeter channel of metabolism measurement module from the delivery kit. Assemble the
circuit as shown in Figure 3.6.
•
Through the inlet port (“Insp” fitting) gas is supplied under breathing pressure through the in-
spiration line to the patient connection port. Through the outlet port (“Exp” fitting) breathing
gas is returned under breathing pressure through the exhalation line from the patient connec-
tion port. Through the EXHAUST port gas is discharged directly into the atmosphere.
•
To choose appropriate breathing circuit for certain humidifier use the information in Table
3.1.