Treaton MV200, Руководство пользователя

Страница: 120 / 222

4.20 Nebulizer
4-72
4.20 Nebulizer
The device provides the use of pneumo spray-type nebulizers (inhalation solutions sprayers),
for example, CIRRUS 2505 made by INTERSURGICAL. These nebulizers are intended for op-
eration with one patient and cannot be sterilized and reused.
While working with the nebulizer, do not use heat and moisture exchange fil-
ter. Inhalation of different medicines can cause blockage of the filter with in-
creasing resistance to exhalation of the breathing circuit.
For preparing the nebulizer for operation:
•
Connect the connecting tube supplied with the nebulizer to the "Nebulizer" fitting on the
front panel of ventilator and to the inlet fitting of the nebulizer (see Figure 4.13).
Figure 4.13 – Connection of the connecting tube of the nebulizer to the nipple on the front panel
of the ventilator
•
Connect the nebulizer to the breathing circuit as shown in Figure 4.14. Operating position of
the nebulizer is below the breathing circuit.
•
Make sure that device is working properly in the appropriate ventilation mode.
•
Set the desired time of nebulizer’s operation in [Menu]
→
[Additional functions]
→
[Nebul.
work time] (0 - 60 min).
•
Turn on the nebulizer by pressing the encoder.
Figure 4.14 – One of the variants of connection of the nebulizer