Treaton MV200 Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 222

Treaton MV200 Скачать руководство пользователя страница 89

4.13 Menu of view of trends and alarm log

4-41

•

MV (minute volume);

•

Tinsp (inspiratory time);

•

RB (respiratory rate).

All trends are synchronized and linked to the same time point selected by the cursor on the
graph.

Moving the cursor is performed by rotating the encoder or by pressing the touch buttons at the
bottom  part  of  the  trend  window.  Incorrectly  measured  and  unmeasured  parameters  are
displayed  as  gaps  in  the  graphs  and  as  dashes  in  the  value  field.  To  the  right  of  the  trend,
values  at  the  selected  moment  are  displayed.  The  bottom  line  displays  the  time  and  date  of
recording.

Trends are cyclically recorded in non-volatile memory and restored when the power is turned
on. Duration of trends is the last 240 hours of device’s operation.

To return from the trend window to the main mode press the "Menu"

button or click the

encoder.

"Edit" parameter

Using "Edit" parameter operator can set time scale of the main trends (the width of the trend
window in minutes), their number:

and displayed parameters (this menu is also available by pressing on the area of displaying
parameter values that is to the right of the area of displaying trends):

Trend review is carried out without interrupting of ventilation. Measurement
and indication of the ventilation parameters are also saved.

«
...
87
88
89
90
91
...
»

Содержание MV200































































































































































































































Отзывы:

Нет отзывов