Toshiba e-studio 2330C Скачать руководство пользователя страница 208

Страница: 208 / 262

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

3-89

3.22 To Prevent Dark Toner from Coming Off

Before the adjustment

After the adjustment

The dark toner comes off.

The dark toner is securely fixed.

Explanation

When highly colored lines, where a large accumulated amount of C, M, Y and K toners are used, are created on

raster data (image), such as BMP, GIF, JPEG and TIFF, and printed on the rough surface of paper or thick paper,

the toner may come off the paper. This is because the C, M, Y and K toners may be overlaid, the paper may be

extremely thick or the surface may be rough, and the amount of toner used may be insufficient. Adjust the limit

value of the maximum amount of toner used, in order to avoid a toner fixing problem.

This adjustment does not affect a single color of C, M, Y and K, or bright colors such as red and green.

Procedures

* The service technician must perform all adjustments.

* This adjustment will have an effect only on Auto or Color mode printing.

(1) Enter adjustment mode [05]. Decrease the values for code [8070] or [8071] to reduce the limit value of the

maximum amount of toner used.

•

Adjust the value for [05] code corresponding to the print option to be applied (Paper type and Halftone).

*Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)

PCL6

PS3

Mac

XPS

3. Printer-specific Adjustments

Содержание e-studio 2330C

































































































































































































































































Результаты поиска

Содержание e-studio 2330C

Отзывы:

Похожие инструкции для e-studio 2330C

Бренды по названию

Популярные бренды

Toshiba e-studio 2330C, Руководство по визуализации

Результаты поиска

Содержание e-studio 2330C

Отзывы:

Похожие инструкции для e-studio 2330C

Бренды по названию

Популярные бренды