background image

1

RISO MAKES NO WARRANTY OF ANY KIND WITH REGARD
TO THIS USER'S GUIDE, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. RISO SHALL NOT
BE LIABLE FOR ERRORS CONTAINED HEREIN OR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, PERFORMANCE OR
USE OF THIS USER'S GUIDE. RISO ASSUMES NO LIABILITY
FOR DAMAGES RESULTING FROM THE USE OF THE
INFORMATION CONTAINED HEREIN.

FCC Warning
- For RP3700I, RP3790I, RP3500UI, RP3590UI and RP3100UI
Models Only

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own expense.

WARNING
– For RP3700W, RP3790W, RP3500AW, RP3590AW and
RP3100AW Models Only

This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

WARNING

The Back Light Tube of the LCD of the Control Panel on this model contains mercury
which must be recycled or disposed of as hazardous waste.

Copyright

2000 RISO KAGAKU CORPORATION

Содержание RP3100AW

















































































































































































































Отзывы: