Riso RP3100AW, Руководство пользователя

Страница: 69 / 208

69
R
epositioning
the Print
The print position can be adjusted vertically (up and down)
and horizontalty (to the right and left). The allowable range
is ±10mm (±
3
⁄
8
").
Print position can be adjusted during printing without
stopping the operation by pressing the Print Position
Adjustment keys (except for the Print Position Center key).
NOTE
If you adjust the print position, be sure to produce
test prints to verify the new print position.
Press the Print Position Adjustment keys.
The print position moves by 0.5mm with each press of the
key. This distance can be changed to 0.25mm by touching
the [Fine] button on the Main-panel window.
When the Print Position Adjustment key is pressed, the
shift distance of the print position and the result of the
adjustment appear in the [Print Position] frame in the Main-
panel window.
Besides, the current print position will be memorized, thus
allowing you to recover it for the print job of the following
original by touching the [Recall] button.
Moves print position down.
Moves print position to the left.
Moves print position up.
Print Position Center key
Returns print position to the center.
Moves print position to the right.
START
STOP
RESET
CENTER
PRINT
POSITION
SLOW FAST
SPEED
DENSITY
LIGHT DARK
TEST PRINT
1 2 3 4 5
1 2 3 4 5
1 2 3
4 5 6
7
8 9
0 C
CENTER
PRINT
POSITION
A3/Black 13:59
SORTER>OFF AUTO-GO>OFF
Ready to Print
Renew Page
Reserved Fine
10. 0mm
A
10. 0mm
Aux. Menu Print Position Paper
Idle
M
A 3
Standard