manualshive.com logo in svg

Riso RP3100AW, Руководство пользователя

Поделиться
Скачать
Riso RP3100AW Скачать руководство пользователя страница 194

194

Troubleshooting Tips

Problem

Cause

Action

The back of finished copies are
smudged with ink.

Paper sticks to the surface of the Print
Cylinder (Drum).

Paper cannot feed well from the
standard paper feed tray.

Paper cannot feed well from the feed
trays of the Multi-tray paper feeder.

The printer repeats the master-making
process for each copy of the identical
page.

The standard Paper Feed Tray is not
selected when the printing paper is
automatically selected in the auto paper
size selection mode.
(For RP3790 and RP3590 only)

The rubber Pressure roller,
which keeps printing paper
pressed against the Print
Cylinder (Drum) during
printing, may be stained with
ink.

The paper size indicated in
the Main Display may be
larger than the actual size of
printing paper loaded.
In this case, images might be
printed beyond the paper
frame, causing the rubber
Pressure roller to be stained
with ink.

Paper slips.

Curled paper may be placed
in the feed trays.

The [Collate Copies] or
[Collate] option was selected
as a print condition for the
received document data.

The [Triple-Tray Source]
feature on the [Properties]
window is not selected.

Remove the Print Cylinder (Drum) and
clean the roller gently with a soft cloth
or tissue.

☞

 

p.177...

 Cleaning

Make the displayed paper size equal to
the actual one.

☞

 

p.65...

 Selecting Printing Paper

• Use recommended printing paper.

☞

 

p.18...

 Paper Reccomendations

• Lower the vertical print position with

the Print Position Adjustment key.

☞

 

p.69...

 Repositioning the Print

• Replace the original in the reverse

direction and restart printing from the
beginning (master-making).

• Set the Paper feed pressure

adjustment lever to “CARD”.

☞

 

p.20...

 Preparing to Print

• Change the Paper feed mode

according to the type of the paper in
use.

Replace paper, turning it over, in the
feed trays.
If this doesn’t work, change paper.

Cancel the current print job and send
the document data concerned again
without selecting the  [Collate Copies]
or [Collate] option as a print condition.

Select the [Triple-Tray Source] feature.

Содержание RP3100AW

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды