manualshive.com logo in svg

Riso RP3100AW, Руководство пользователя

Поделиться
Скачать
Riso RP3100AW Скачать руководство пользователя страница 176

176

!

 

WARNING

 

[ To Avoid Personal Injury ]

    •  DO NOT allow unauthorized persons to make adjustments or repairs.
    •  DO NOT remove any fixed covers.
    •  CALL your dealer immediately if you suspect any dangerous situations or have

questions or problems with the unit.

    •  When you want to move the unit, contact your dealer.

!

 Caution

 

[ To Avoid Mechanical Problems ]

    •  Precision parts and driving mechanisms are contained in the unit. Do not perform

actions other than those described in this manual.

    •  Don't make any modifications to the unit or remove parts.
    •  Neither RISO nor its dealer is responsible for maintenance service performed by

non-RISO-authorized personnel.

The lithium battery in your machine should last about five
years.

When the battery has lost most of the power, however, the
message to the right appears in the Main Display. In this case,
call your authorized service representative and request to
replace battery.

!

Caution

The lithium battery must be replaced by a
trained and authorized service representative.

Replacing the Lithium Battery

S

afety Guides

- Maintenance

!!Battery Replacement!!
Call Service

Содержание RP3100AW

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды