Thermo Scientific VF-F20-A, Руководство по эксплуатации

Страница: 112 / 240

6
•
Operation
Page 112 Integral Fraction Collector FT (VF-F20-A) Operating Manual
Below table is listed with auto needle height default values and settable
ranges for different rack types that are provided by Thermo Scientific.
Rack Type
AboveVial Mode InVial Mode
Default
Needle
Height
[mm] Needle
Height
settable
range [mm] Default
Needle
Height
[mm] Needle
Height
settable
range [mm]
ThermoVial54 34 10-50 10 10-45
ThermoVial96_6mm 34 10-50 10 10-45
ThermoVial96_7mm 42 10-50 10 10-45
ThermoVial96_8mm 42 10-50 10 10-45
ThermoVial9 48 10-50 10 10-45
ThermoVial16 48 10-50 10 10-45
WellPlate96 n.a. 10-50 3 3-41.5
WellPlate384 n.a. 10-50 3 3-41.5
For AboveVial mode the default needle height value considers a
distance of 2 mm between the height of the vial and the needle tip to
ensure no needle obstruction can happen.
For the use of well plates in AboveVial mode the plate height must be
configured into the system manually. For details of needle positioning
mode settings, refer to the
Chromeleon Help.
NOTICE
It is highly recommended to use the Vanquish rack type barcoded
sample racks and well plates. Following actions may cause needle
damage, sample loss and solvent spraying:
•
Using unknown racks or well plates
•
Not properly setting the needle height parameters
•
Not properly placing the racks or well plates in fraction collector
compartment.