Thermo Scientific VF-F20-A, Руководство по эксплуатации

Страница: 57 / 240

5
•
Installation
Integral Fraction Collector FT (VF-F20-A) Operating Manual Page 57
5.2 Installing the Device
The Vanquish system is installed and set up by a Thermo Fisher Scientific
service engineer, including all modules and options or parts shipped with
them. The service engineer checks that the installation is correct and
that the Vanquish system and modules operate as specified. The
engineer also demonstrates the basic operation and main features.
If personnel other than a Thermo Fisher Scientific service engineer
installs the device, follow the steps below.
1. Pay attention to the safety guidelines and observe all site
requirements. See Safety Guidelines for Installation (

page 56) and
Site Requirements (

page 59) .
2. Set up the device hardware. See Setting Up the Hardware (

page
63) .
3. Set up the flow connections. See Setting Up the Flow Connections (

page 68) .
4. Turn on the device
TIP Before turning on the power to a Vanquish system module for the
first time, verify that the chromatography software is installed on the
data system computer. When the power is turned on, the required USB
drivers are automatically found and the Windows® operating system can
detect the device.
5. Set up the device in the software. See Setting Up the Device in the
Software (

page 94) .
6. Recommended:
Perform Instrument Installation Qualification.
Follow the instructions in the Instruments Installation Qualification
Operating Instructions . The manual provides information about the
required materials and detailed instructions.
7. Recommended:
Perform Operational Qualification.
The qualification kit includes all materials required for the
qualification and detailed instructions.