Thermo Scientific 3600 PDM, Руководство пользователя

Страница: 63 / 132

Using the WinPDM Software
Configuring a Program Shift
Thermo Fisher Scientific PDM 3600 Instruction Manual 3-11
Figure 3–11. Reset Sample 2 screen
2. In the Reset Sample 2 screen, press the “A” button to begin a second
primary sample run. The second primary sample run will begin
immediately after pressing the “A” button. The PDM unit will not
perform another 35-minute warmup period before beginning the
second primary sample run, and the Second Sample screen will display.
Note After 30 seconds of inactivity in the Reset Sample 2 screen, the PDM
will automatically display the First Sample Screen #1.
▲
When in the Program Shift screen ( Figure 3–12 ), you can set up your
sample run parameters, including identifying the mine information and
setting up the sample start time, duration and type.
When in the PDM - COM1 screen, select the “Program Shift” button to
display the Program Shift screen. These values will be stored in the PDM’s
data storage buffer, and will display on the “Dust Data Card” that can be
downloaded at the end of the sample run.
Figure 3–12. Program Shift screen
Configuring a
Program Shift