Thermo Scientific 3600 PDM, Руководство пользователя

Страница: 21 / 132

Introduction
Organization of Manual
Thermo Fisher Scientific PDM 3600 Instruction Manual 1-5
This manual is divided into six sections and appendices. The early sections
describe set up of the system’s hardware and software, while later sections
explain the advanced features of the TEOM 3600 PDM. Users should read
and understand earlier sections before attempting procedures described
later in the manual. The following list provides an overview of the topics
handled in each section of this manual:
●
Chapter 1 “ Introduction ” explains features of the PDM and describes
the contents of this operating manual and the theory of operation of
the device, as well as providing information about internal flows,
sample inlets, and the flow control calculations.
●
Chapter 2 “ Basic Operation ” describes how to set up the hardware and
software for the PDM and provides an overview of the PDM’s
firmware and explains the unit’s status codes (“error” conditions).
●
Chapter 3 “ Using the WinPDM Software ” explains how to set up
manual and programmed samples.
●
Chapter 4 “ Viewing and Saving Data ” describes how to configure data
logging, view real-time data during the sample run and how to
download data from the PDM.
●
Chapter 5 “ Maintenance and Calibration ” explains how to verify the
PDM’s performance and describes basic maintenance procedures.
●
Chapter 6 “ Troubleshooting ” presents guidelines for diagnosing
equipment failures.
●
Appendix A “ Parts and Consumables ” lists the spare parts and
consumables with the PDM.
Organization of
Manual